AudioRoundTable.com: Pi Speakers » Crossover question(s)

Home » Sponsored » Pi Speakers » Crossover question(s)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: L2 should be 0.7mH w/ the 2226H's [message #37890 is a reply to message #37885]

Mon, 19 August 2002 18:01

bmar
Messages: 346
Registered: May 2009

Grand Master

Yes Like Sam said. Wayne has these babies ready to handle the full 600 watts and probly a safty margin. and that's max on the driver's

I only use 10watt resisters and they dont even get warm for playing music in the house. Take my setup outside and put the feed to it and you'll see a smoke show! but for inside at levels more than loud enough to deafen you derated works for me.

Bill

Report message to a moderator

[Message index]

		Crossover question(s) By: LuxmanLover on Mon, 19 August 2002 10:17
		Re: Crossover question(s)Part 2 By: LuxmanLover on Mon, 19 August 2002 10:22
		L2 should be 0.7mH w/ the 2226H's By: Sam P. on Mon, 19 August 2002 10:35
		Re: L2 should be 0.7mH w/ the 2226H's By: bmar on Mon, 19 August 2002 18:01

Previous Topic:	Two Pi's Up and Running!!
Next Topic:	more on (or moron on ) crossovers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 21:51:03 CST 2024