AudioRoundTable.com: Pi Speakers » altec gear in a pi box??

Home » Sponsored » Pi Speakers » altec gear in a pi box??

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: altec gear in a pi box?? 825 cabinet [message #37533 is a reply to message #37520]

Fri, 26 July 2002 20:22

Tom Brennan
Messages: 32
Registered: May 2009

Baron

Ez---Though the 825 has a shelved response and is not flat down to 40hz subjectively it has a very good sound and many fans. Bass is better with the 416 woofer (A7) than with the 515B (A5) though nothing and I mean nothing, does better upper bass and lower mids than a 515B in an 825. I've found that well recorded electric bass sounds very lifelike over 825s with 416s and I've played bass for years. But the 416 in a vented box is a safer bet, it's flatter. If you can't hear 416s in 825s and judge yourself the vented box is probably the way to go.

Report message to a moderator

[Message index]

		altec gear in a pi box?? By: EZ_Angus on Thu, 25 July 2002 19:08
		π speakers with Altec parts By: Wayne Parham on Thu, 25 July 2002 19:45
		the 500Hz. xover "myth" By: Sam P. on Fri, 26 July 2002 05:19
		Re: the 500Hz. xover "myth" By: Tom Brennan on Fri, 26 July 2002 07:11
		Tommy, I based my remarks upon Altec's By: Sam P. on Fri, 26 July 2002 08:32
		Re: altec gear in a pi box?? By: EZ_Angus on Fri, 26 July 2002 08:01
		Re: altec gear in a pi box?? By: Wayne Parham on Fri, 26 July 2002 12:52
		Re: altec gear in a pi box?? 825 cabinet By: Tom Brennan on Fri, 26 July 2002 20:22
		Re: altec gear in a pi box?? By: EZ_Angus on Fri, 26 July 2002 15:58
		Re: altec gear in a pi box?? By: Wayne Parham on Sat, 27 July 2002 00:57

Previous Topic:	Anyone need a JBL 4648A-8 or some 2226J woofers, contact me off list
Next Topic:	replacing mid range speaker

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Aug 16 08:49:15 CDT 2024