AudioRoundTable.com: Pi Speakers » altec gear in a pi box??

Home » Sponsored » Pi Speakers » altec gear in a pi box??

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: the 500Hz. xover "myth" [message #37518 is a reply to message #37517]

Fri, 26 July 2002 07:11

Tom Brennan
Messages: 32
Registered: May 2009

Baron

Sam---Running the 806 down to 500, even with a 1st order crossver, has not led to audible distortion problems at fairly loud sound levels. JBL 1" drivers used like this have clacked all to Hell. Note that the 1" Altecs were intended to run down to 500 and be used in theaters under 450 seats in the bargain. In any case I'd use the 511B horn, even if crossing at 800, simply because it looks so cool and sounds so good.

Chicago Horn Club

Report message to a moderator

[Message index]

		altec gear in a pi box?? By: EZ_Angus on Thu, 25 July 2002 19:08
		π speakers with Altec parts By: Wayne Parham on Thu, 25 July 2002 19:45
		the 500Hz. xover "myth" By: Sam P. on Fri, 26 July 2002 05:19
		Re: the 500Hz. xover "myth" By: Tom Brennan on Fri, 26 July 2002 07:11
		Tommy, I based my remarks upon Altec's By: Sam P. on Fri, 26 July 2002 08:32
		Re: altec gear in a pi box?? By: EZ_Angus on Fri, 26 July 2002 08:01
		Re: altec gear in a pi box?? By: Wayne Parham on Fri, 26 July 2002 12:52
		Re: altec gear in a pi box?? 825 cabinet By: Tom Brennan on Fri, 26 July 2002 20:22
		Re: altec gear in a pi box?? By: EZ_Angus on Fri, 26 July 2002 15:58
		Re: altec gear in a pi box?? By: Wayne Parham on Sat, 27 July 2002 00:57

Previous Topic:	Anyone need a JBL 4648A-8 or some 2226J woofers, contact me off list
Next Topic:	replacing mid range speaker

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 17 08:23:54 CDT 2024