AudioRoundTable.com: Pi Speakers » Just bought pre-cut MDF for my One Pi speakers!

Home » Sponsored » Pi Speakers » Just bought pre-cut MDF for my One Pi speakers!

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Port stuff [message #37376 is a reply to message #37375]

Thu, 18 July 2002 11:50

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

We'll see what I'll do then. As I said, I can get 59.2mm ID grey PVC tubes. That's only about 1mm off (I could make the port something like 2mm shorter, hehe) and now that I got the tips from you about the veneering I feel that it might be the right way to do it. Is the inside of the port painted black before or after the veneer is applied and trimmed around the hole?

/Erik

Report message to a moderator

[Message index]

		Just bought pre-cut MDF for my One Pi speakers! By: Erik Johansson on Thu, 18 July 2002 11:24
		Forgot the "real" question! By: Erik Johansson on Thu, 18 July 2002 11:26
		Port stuff By: Wayne Parham on Thu, 18 July 2002 11:46
		Re: Port stuff By: Erik Johansson on Thu, 18 July 2002 11:50
		Re: Port stuff By: Wayne Parham on Thu, 18 July 2002 12:09
		Building the cabinets By: Erik Johansson on Thu, 18 July 2002 13:39
		Re: Building the cabinets By: BillEpstein on Thu, 18 July 2002 15:00

Previous Topic:	Sensitivity ratings for Delta 15 etc
Next Topic:	wall lining in two Pis

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Jul 16 23:25:16 CDT 2024