AudioRoundTable.com: Pi Speakers » Building a pair of 2 Pi in solid pine?

Home » Sponsored » Pi Speakers » Building a pair of 2 Pi in solid pine?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tolerance [message #37335 is a reply to message #37312]

Mon, 15 July 2002 19:36

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

Why don't you put the flange on the inside of the box so it, and it's screws, don't show. Add the thickness of the box to the port, of course.Just paint the inside edge of the hole black and put a little sealant under the flange.

Report message to a moderator

[Message index]

		Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 05:13
		Re: Building a pair of 2 Pi in solid pine? By: Wayne Parham on Sun, 14 July 2002 11:43
		Re: Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 12:42
		Tolerance By: Wayne Parham on Sun, 14 July 2002 14:38
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 10:04
		Re: Tolerance By: Wayne Parham on Mon, 15 July 2002 10:56
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 11:15
		Re: Tolerance By: BillEpstein on Mon, 15 July 2002 19:36
		Re: Building a pair of 2 Pi in solid pine? By: vladimir4 on Mon, 15 July 2002 00:34

Previous Topic:	T/S on the JBL 115H woofer
Next Topic:	Wayne or anybody: L-pad values

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 01 10:56:02 CST 2025