AudioRoundTable.com: Pi Speakers » Building a pair of 2 Pi in solid pine?

Home » Sponsored » Pi Speakers » Building a pair of 2 Pi in solid pine?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Tolerance [message #37314 is a reply to message #37313]

Mon, 15 July 2002 11:15

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

Ok I got it. I didn't know if I should measure the entire inside of the tube or how long into the cabinet. But now I know it's the internal length of the tube.

Thanks, will get some pictures of the project (We'll be building 2 pairs of 2 Pi).

/Erik

Report message to a moderator

[Message index]

		Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 05:13
		Re: Building a pair of 2 Pi in solid pine? By: Wayne Parham on Sun, 14 July 2002 11:43
		Re: Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 12:42
		Tolerance By: Wayne Parham on Sun, 14 July 2002 14:38
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 10:04
		Re: Tolerance By: Wayne Parham on Mon, 15 July 2002 10:56
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 11:15
		Re: Tolerance By: BillEpstein on Mon, 15 July 2002 19:36
		Re: Building a pair of 2 Pi in solid pine? By: vladimir4 on Mon, 15 July 2002 00:34

Previous Topic:	T/S on the JBL 115H woofer
Next Topic:	Wayne or anybody: L-pad values

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 01 10:53:46 CST 2025