AudioRoundTable.com: Pi Speakers » Building a pair of 2 Pi in solid pine?

Home » Sponsored » Pi Speakers » Building a pair of 2 Pi in solid pine?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Tolerance [message #37302 is a reply to message #37298]

Sun, 14 July 2002 14:38

Wayne Parham
Messages: 18831
Registered: January 2001

Illuminati (33rd Degree)

The difference between what you've got and what was recommended was only 1.5mm, or about 0.06". Accuracy to sixty thousands of an inch here is completely fine.

Report message to a moderator

[Message index]

		Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 05:13
		Re: Building a pair of 2 Pi in solid pine? By: Wayne Parham on Sun, 14 July 2002 11:43
		Re: Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 12:42
		Tolerance By: Wayne Parham on Sun, 14 July 2002 14:38
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 10:04
		Re: Tolerance By: Wayne Parham on Mon, 15 July 2002 10:56
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 11:15
		Re: Tolerance By: BillEpstein on Mon, 15 July 2002 19:36
		Re: Building a pair of 2 Pi in solid pine? By: vladimir4 on Mon, 15 July 2002 00:34

Previous Topic:	T/S on the JBL 115H woofer
Next Topic:	Wayne or anybody: L-pad values

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 01 11:01:45 CST 2025