AudioRoundTable.com: Pi Speakers » Building a pair of 2 Pi in solid pine?

Home » Sponsored » Pi Speakers » Building a pair of 2 Pi in solid pine?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Building a pair of 2 Pi in solid pine? [message #37298 is a reply to message #37292]

Sun, 14 July 2002 12:42

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

Will do so! The prices are almost the same for 16mm and 19mm MDF so I think I'll be going with 19mm. Also about the ports. You said my 50mm ID ports would be OK for the 2 Pi but I would still like to know, if I DO want to fine tune them, EXACTLY how long should I make them?

/Erik

Report message to a moderator

[Message index]

		Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 05:13
		Re: Building a pair of 2 Pi in solid pine? By: Wayne Parham on Sun, 14 July 2002 11:43
		Re: Building a pair of 2 Pi in solid pine? By: Erik Johansson on Sun, 14 July 2002 12:42
		Tolerance By: Wayne Parham on Sun, 14 July 2002 14:38
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 10:04
		Re: Tolerance By: Wayne Parham on Mon, 15 July 2002 10:56
		Re: Tolerance By: Erik Johansson on Mon, 15 July 2002 11:15
		Re: Tolerance By: BillEpstein on Mon, 15 July 2002 19:36
		Re: Building a pair of 2 Pi in solid pine? By: vladimir4 on Mon, 15 July 2002 00:34

Previous Topic:	T/S on the JBL 115H woofer
Next Topic:	Wayne or anybody: L-pad values

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 17 21:44:19 CDT 2024