AudioRoundTable.com: Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Home » Sponsored » Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Which MDF thickness do you recommend? 5/8"? [message #36927 is a reply to message #36919]

Mon, 17 June 2002 10:09

Erik Johansson
Messages: 65
Registered: May 2009

Viscount

I found out that I'll have to buy MDF for this project anyway. So now I have the choice of going with any thickness. What do you recommend? Standard 5/8" would be 16mm with our metric system and 3/4" would be 19mm for me. I'm hoping I won�t have to brace the cabinet to get a top performing speaker, do I need bracing with the 16mm (5/8") MDF?

/Erik

Report message to a moderator

[Message index]

		Can I build my Studio One Pi using 3/4" MDF? By: Erik Johansson on Sun, 16 June 2002 15:17
		Re: Can I build my Studio One Pi using 3/4" MDF? By: Adam on Sun, 16 June 2002 15:20
		Yes. Just make sure port length is right. By: Wayne Parham on Sun, 16 June 2002 19:55
		Re: Which MDF thickness do you recommend? 5/8"? By: Erik Johansson on Mon, 17 June 2002 10:09
		5/8" is plenty By: Wayne Parham on Mon, 17 June 2002 11:53

Previous Topic:	Anyone want to trade a pair of 2226H for my pair of 2226J?
Next Topic:	CAS Canadian Audio Speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 18:59:44 CST 2024