AudioRoundTable.com: Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Home » Sponsored » Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Yes. Just make sure port length is right. [message #36919 is a reply to message #36914]

Sun, 16 June 2002 19:55

Wayne Parham
Messages: 18726
Registered: January 2001

Illuminati (33rd Degree)

It will be just fine. But do make sure that your port is the right length. You want a tube that's 2.38" inside diameter and 3.5" long. Don't overlook the length of the baffle when installing the port. We want a tube that's 3.5" long from entrance to exit.

Report message to a moderator

[Message index]

		Can I build my Studio One Pi using 3/4" MDF? By: Erik Johansson on Sun, 16 June 2002 15:17
		Re: Can I build my Studio One Pi using 3/4" MDF? By: Adam on Sun, 16 June 2002 15:20
		Yes. Just make sure port length is right. By: Wayne Parham on Sun, 16 June 2002 19:55
		Re: Which MDF thickness do you recommend? 5/8"? By: Erik Johansson on Mon, 17 June 2002 10:09
		5/8" is plenty By: Wayne Parham on Mon, 17 June 2002 11:53

Previous Topic:	Anyone want to trade a pair of 2226H for my pair of 2226J?
Next Topic:	CAS Canadian Audio Speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 12:27:22 CDT 2024