AudioRoundTable.com: Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Home » Sponsored » Pi Speakers » Can I build my Studio One Pi using 3/4" MDF?

Sun, 16 June 2002 15:20

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

The 3/4" would work better if anything, but I doubt you would notice much difference.

I don't even think you have to worry about recalculating the box size, the difference would be negligable...

Adam

		Can I build my Studio One Pi using 3/4" MDF? By: Erik Johansson on Sun, 16 June 2002 15:17
		Re: Can I build my Studio One Pi using 3/4" MDF? By: Adam on Sun, 16 June 2002 15:20
		Yes. Just make sure port length is right. By: Wayne Parham on Sun, 16 June 2002 19:55
		Re: Which MDF thickness do you recommend? 5/8"? By: Erik Johansson on Mon, 17 June 2002 10:09
		5/8" is plenty By: Wayne Parham on Mon, 17 June 2002 11:53

Previous Topic:	Anyone want to trade a pair of 2226H for my pair of 2226J?
Next Topic:	CAS Canadian Audio Speakers?

Goto Forum:

] [

]

Current Time: Sun Nov 24 01:31:11 CST 2024