AudioRoundTable.com: Pi Speakers » Changing dimentions..

Home » Sponsored » Pi Speakers » Changing dimentions..

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Changing dimensions [message #36789 is a reply to message #36786]

Thu, 06 June 2002 15:49

Wayne Parham
Messages: 18908
Registered: January 2001

Illuminati (33rd Degree)

Your cabinet volume is close to that of the "stock" design, so I suspect that speakers built to these dimensions will perform well. Cabinet volume is the main thing, and if you make it the same - Your speakers will work well. Of couse, you can't make one dimension very thin in relation to the others, or standing waves will become significant. But your suggested dimensions are probably just fine.

I recommend that you move the woofer and tweeter up towards the top of the cabinet, and keep them the same distance apart from one another. I'm not as concerned with port placement, but I would leave it near the bottom of the cabinet.

Report message to a moderator

[Message index]

		Changing dimentions.. By: Firefli on Thu, 06 June 2002 09:07
		Re: Changing dimensions By: Wayne Parham on Thu, 06 June 2002 15:49
		Re: Changing dimensions By: Firefli on Fri, 07 June 2002 08:17
		depending on which wall is the wide one, By: Sam P. on Sat, 08 June 2002 10:46
		Re: depending on which wall is the wide one, By: Firefli on Sun, 09 June 2002 07:55

Previous Topic:	more ignorance of the general public...
Next Topic:	Theater 4pi horn/woofer time alignment?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat May 24 04:40:39 CDT 2025