AudioRoundTable.com: Pi Speakers » Port size for 4 Pi with JBL 2205 driver

Home » Sponsored » Pi Speakers » Port size for 4 Pi with JBL 2205 driver

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Port size for 4 Pi with JBL 2205 driver [message #36780 is a reply to message #36777]

Wed, 05 June 2002 09:33

Wayne Parham
Messages: 18939
Registered: January 2001

Illuminati (33rd Degree)

You're right - My plans for 2205's are handwritten. But there is a PID file for the JBL2205 in PiAlign. It calls for a 6.1" dia port that's 5.6" long. Alternately a 5.6" long rectangular port of 4" x 7.25" can be used. You could also use a 3" diameter hole cut into a 1" baffle, with no duct added.

Report message to a moderator

[Message index]

		Port size for 4 Pi with JBL 2205 driver By: spkrman57 on Wed, 05 June 2002 07:23
		Re: Port size for 4 Pi with JBL 2205 driver By: Wayne Parham on Wed, 05 June 2002 09:33

Previous Topic:	Another set of 4 pis - my first
Next Topic:	Premium Stage Four Pi's Done!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jun 29 02:13:05 CDT 2025