AudioRoundTable.com: Pi Speakers » Quick question for Kappa 15LFA users

Home » Sponsored » Pi Speakers » Quick question for Kappa 15LFA users

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Quick question for Kappa 15LFA users [message #36696 is a reply to message #36695]

Wed, 29 May 2002 12:40

Adam
Messages: 419
Registered: May 2009

Illuminati (1st Degree)

I'm honestly not sure, but I'm definitely considering that to be on the low end for box volume. The smallest I ran my kappas in was about 3.5 cuft, that was on a temporary basis. My 'customary' enclosure for these woofers is 5 cuft tuned to 40 Hz with a pair of 4" diameter ports. Personally, I would drop down to a 12" woofer before I would run the kappa 15lf in an enclosure that small. It might sound adequate, but it's a stretch!

http://enclave.hypermart.net/bird/eminencepa/doneanddone/done1.JPG
http://enclave.hypermart.net/bird/eminencepa/pa1502/eminence3.jpg

Adam

Report message to a moderator

[Message index]

		Quick question for Kappa 15LFA users By: RyanH on Wed, 29 May 2002 12:25
		Re: Quick question for Kappa 15LFA users By: Adam on Wed, 29 May 2002 12:40
		Re: Quick question for Kappa 15LFA users By: RyanH on Wed, 29 May 2002 12:44
		Re: Quick question for Kappa 15LFA users By: Adam on Wed, 29 May 2002 18:11
		Re: Quick question for Kappa 15LFA users By: Adam on Wed, 29 May 2002 18:31
		WHOOPS! car is just for transport! By: RyanH on Wed, 29 May 2002 21:36
		Re: Quick question for Kappa 15LFA users By: Colin Fritzke on Wed, 29 May 2002 16:55
		Oops! I just read you said this was for a Sentra.... By: Colin Fritzke on Wed, 29 May 2002 17:00

Previous Topic:	Re: linkt to π Speaker Crossover Document
Next Topic:	question about fasteners and dampening

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Sep 12 12:34:47 CDT 2024