AudioRoundTable.com: Pi Speakers » Reverse attenuation and HF comp. networks, active X-over

Home » Sponsored » Pi Speakers » Reverse attenuation and HF comp. networks, active X-over

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Reverse attenuation and HF comp. networks, active X-over [message #36604 is a reply to message #36598]

Thu, 23 May 2002 23:01

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

Adjust the Q of the high-pass filter, which would then allow you to adjust peaking slightly above 0.707, to around 1.0. Add a voltage divider with bypass capacitance. Then you'll be able to set the filter Q for a flat shelf followed by rising response.

Report message to a moderator

[Message index]

		Reverse attenuation and HF comp. networks, active X-over By: Chris R. on Mon, 20 May 2002 21:30
		Re: Reverse attenuation and HF comp. networks, active X-over By: Wayne Parham on Mon, 20 May 2002 22:34
		Re: Reverse attenuation and HF comp. networks, active X-over By: Chris R on Wed, 22 May 2002 21:17
		Re: Reverse attenuation and HF comp. networks, active X-over By: Wayne Parham on Wed, 22 May 2002 21:49
		Re: Reverse attenuation and HF comp. networks, active X-over By: Chris R. on Thu, 23 May 2002 16:50
		Re: Reverse attenuation and HF comp. networks, active X-over By: Wayne Parham on Thu, 23 May 2002 23:01

Previous Topic:	Mr. Parham
Next Topic:	Lathe turned horn for PSD2002

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 05:41:38 CST 2024