AudioRoundTable.com: Pi Speakers » Need crossover help

Home » Sponsored » Pi Speakers » Need crossover help

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Need crossover help [message #36166 is a reply to message #36148]

Mon, 29 April 2002 23:38

Jostein
Messages: 4
Registered: May 2009

Esquire

I dont have any response curve of the tweeter, but I used a 900Hz filter I had around with a L-pad, just to test how it sounded and I think i will need top octave compensation. I think a crossover freq. of about 1.6-2kHz should be fine for this driver. I have never designed a crossover before and would be very grateful if you had som drawings of a crossover to use with this driver. The impedance of the driver is 8 ohm

Report message to a moderator

[Message index]

		Need crossover help By: Jostein on Mon, 29 April 2002 02:40
		Re: Need crossover help By: Wayne Parham on Mon, 29 April 2002 10:05
		Re: Need crossover help By: Jostein on Mon, 29 April 2002 23:38
		Re: Need crossover help By: Wayne Parham on Tue, 30 April 2002 00:25
		Thank You Wayne. I have sent Email adress. (NT) By: Jostein on Tue, 30 April 2002 03:56
		You have mail! By: Wayne Parham on Tue, 30 April 2002 07:13

Previous Topic:	got some exponential horn plans ready
Next Topic:	Any Theater 4 pis in/near W. Mass?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Nov 28 20:49:23 CST 2024