AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » PSD2002 Horn

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Mon, 08 April 2002 08:09

Sam P.
Messages: 307
Registered: May 2009

Grand Master

the construction is much thinner, from a harder, "more brittle sounding" polycarbonate or something, not the same as the H-290 plastic. The brass insert looks well machined, at any rate. I just wanted to use the included 2/3 bolt to screw-on adapters as "drilling jigs" to allow the use of jbl 2426's and other 1 inch, 3 bolt drivers on my 511's (oem is 2 bolt) in the future. Sam

Report message to a moderator

[Message index]

		PSD2002 Horn By: KevinP on Sun, 07 April 2002 08:40
		Re: PSD2002 Horn By: Wayne Parham on Sun, 07 April 2002 15:28
		Re: PSD2002 Horn By: KevinP on Mon, 08 April 2002 18:31
		if they are similar to 269-107 By: Sam P. on Mon, 08 April 2002 08:09

Previous Topic:	Plans for 4Pi
Next Topic:	Dayton Crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 13 16:19:27 CDT 2024