AudioRoundTable.com: Pi Speakers » My point of view, if interesting.

Home » Sponsored » Pi Speakers » My point of view, if interesting.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

punch the specs into boxplot or pi align [message #35697 is a reply to message #35696]

Wed, 27 March 2002 08:16

Sam P.
Messages: 307
Registered: May 2009

Grand Master

and see what kind of Vb is required. From there, the design process is pretty straight forward. The regular Kappa12 looks similar to the Delta12LF that Wayne uses in the Theater 3 with the eminence PSD-2002 crossed PASSIVE at 1.6kHz. His HF design is "turnkey" complete normally, but if your woofer is higher than the 97 dB sense of the Delta12LF, a different amount of HF padding will be needed. Sam

Report message to a moderator

[Message index]

		My point of view, if interesting. By: Erik from Holland on Wed, 27 March 2002 05:47
		perhaps you should try the PRO AUDIO forum...nt By: Sam P. on Wed, 27 March 2002 06:20
		Re: perhaps you should try the PRO AUDIO forum...nt By: Erik from Holland on Wed, 27 March 2002 08:02
		punch the specs into boxplot or pi align By: Sam P. on Wed, 27 March 2002 08:16
		Re: My point of view, if interesting. By: Wayne Parham on Wed, 27 March 2002 09:10
		My observations and some basic measuring show... By: ToFo on Wed, 27 March 2002 10:28
		Re: My observations and some basic measuring show... By: Erik from Holland on Wed, 27 March 2002 10:45
		Re: My observations and some basic measuring show... By: ToFo on Wed, 27 March 2002 11:21
		Re: My observations and some basic measuring show... By: Wayne Parham on Wed, 27 March 2002 14:38
		kappa12 freq. response By: Sam P. on Wed, 27 March 2002 16:54

Previous Topic:	What is the real purpose of Pi speakers
Next Topic:	What to do with 252s. (it ryhmes, woohoo!)

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 10:11:57 CDT 2024