AudioRoundTable.com: Pi Speakers » Eminance horn bolts

Home » Sponsored » Pi Speakers » Eminance horn bolts

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Eminance horn bolts [message #35610 is a reply to message #35580]

Wed, 20 March 2002 20:00

Super_BQ
Messages: 37
Registered: May 2009

Baron

You can take a look at the photo below what i've done to fit the bolt:

The local fastener shop had a hard time identifying the alen key bolt to fit in. On the invoice the description of the bolt is "Socket Cap Screw - 6 x 16". So i assume 6mm head x 16mm long for the inside 3 bolts. $1.35NZ each so (60 cents US each).

Report message to a moderator

[Message index]

		Eminance horn bolts By: TOttman2 on Wed, 20 March 2002 02:53
		!/4" 20T.P.I. By: Garland on Wed, 20 March 2002 05:03
		Re: !/4" 20T.P.I. By: TOttman2 on Wed, 20 March 2002 05:48
		Re: Eminance horn bolts By: Super_BQ on Wed, 20 March 2002 20:00

Previous Topic:	no promises but i'm try to snag one of these tube
Next Topic:	More four π photo's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Feb 22 16:14:46 CST 2025