AudioRoundTable.com: Pi Speakers » cabinet maker screwed up again

Home » Sponsored » Pi Speakers » cabinet maker screwed up again

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

BoxPlot shows minimal difference in response [message #35526 is a reply to message #35517]

Sun, 17 March 2002 05:58

Wayne Parham
Messages: 18759
Registered: January 2001

Illuminati (33rd Degree)

I ran some simulations and you're going to be just fine. Response changes only imperceptively. In fact, you've got a pretty large window of 30Hz and 10 cubic feet to 45Hz and 2.5 cubic feet where response is linear.

So don't make any changes unless the port is too near the rear of the cabinet. As long as you've got a couple inches clearance, you'll have the same response with the dimensions you gave as with those specified in the plans.

Report message to a moderator

[Message index]

		cabinet maker screwed up again By: replay on Sat, 16 March 2002 18:47
		Re: cabinet maker screwed up again By: Wayne Parham on Sat, 16 March 2002 20:18
		Re: cabinet maker screwed up again By: Adam on Sat, 16 March 2002 20:53
		Re: cabinet maker screwed up again By: Wayne Parham on Sat, 16 March 2002 21:06
		Re: cabinet maker screwed up again By: bmar on Sun, 17 March 2002 05:45
		Re: cabinet maker screwed up again By: replay on Sun, 17 March 2002 08:37
		Re: cabinet maker screwed up again By: mikebake on Sun, 17 March 2002 11:52
		BoxPlot shows minimal difference in response By: Wayne Parham on Sun, 17 March 2002 05:58

Previous Topic:	Theater 4Pi's rockin tha house
Next Topic:	M-252-8B2 at Tent Sale

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 13 01:22:26 CDT 2024