AudioRoundTable.com: Pi Speakers » C5 & R3 values

Home » Sponsored » Pi Speakers » C5 & R3 values - accuracy of driver

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: C5 & R3 values - accuracy of driver [message #35514 is a reply to message #35506]

Sat, 16 March 2002 05:23

Super_BQ
Messages: 37
Registered: May 2009

Baron

Yes my LCR meter is pretty accurate (at least for the inductance goes). I also find it funny that both drivers are not identical spec (with reasonable variances). For each speakers i get an:

Le of 0.66mH & 0.64mH
Re of 6.5 & 6.4 ohms

So for C5 i've installed 15uF Solen capacitor and for R3 I used 7.5 ohm resistor.

Also just finished doing a super duty bracing for the cabinets and letting it set as we speak. Will give a final review after good break-in.

Report message to a moderator

[Message index]

		C5 & R3 values - accuracy of driver By: Super_BQ on Fri, 15 March 2002 04:05
		Re: C5 & R3 values - accuracy of driver By: dbeardsl on Fri, 15 March 2002 08:49
		Re: C5 & R3 values - accuracy of driver By: Super_BQ on Sat, 16 March 2002 05:23
		Re: C5 & R3 values - accuracy of driver By: Wayne Parham on Fri, 15 March 2002 11:15
		the past By: dbeardsl on Sat, 16 March 2002 11:13
		Re: the past By: Super_BQ on Sun, 17 March 2002 00:22
		Cool! By: dbeardsl on Sun, 17 March 2002 00:36

Previous Topic:	now i know what to do with my crawlspace
Next Topic:	Theater 4Pi's rockin tha house

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 17:29:47 CST 2024