AudioRoundTable.com: Pi Speakers » Questions on dual 2226 woofer cabinets

Home » Sponsored » Pi Speakers » Questions on dual 2226 woofer cabinets

Mon, 04 March 2002 17:11

jlharden
Messages: 94
Registered: May 2009

Viscount

Thanks Wayne!

Is the lf section of the crossover appropriate for the dual 2226J's? Thanks for the 2446 schematics. Thanks! Jerrod

		Questions on dual 2226 woofer cabinets By: jlharden on Mon, 04 March 2002 12:23
		Re: Here's a link By: BillEpstein on Mon, 04 March 2002 13:41
		Thanks, Bill! By: Wayne Parham on Mon, 04 March 2002 15:11
		Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Mon, 04 March 2002 15:04
		Re: Use an 600-800Hz crossover on the 2446 By: jlharden on Mon, 04 March 2002 17:11
		Re: Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Mon, 04 March 2002 22:56
		Re: Use an 600-800Hz crossover on the 2446 By: jlharden on Tue, 05 March 2002 15:21
		Re: Use an 600-800Hz crossover on the 2446 By: Wayne Parham on Tue, 05 March 2002 20:06

Previous Topic:	Types of distortion to avoid
Next Topic:	Will Pi Come Up with a "Tower" Enclosure?

Goto Forum:

] [

]

Current Time: Wed Dec 04 01:56:11 CST 2024