AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Calling Till E.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Calling Till E. [message #35134 is a reply to message #35132]

Fri, 15 February 2002 10:34

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

I used the 8 ohm tap. You're question is one I have also because I had a Music Reference RM-10 of which the designer advised using the 4 ohm tap with 8 ohm speakers. He calls this "light loading"; it reduces the output from 35 to 27 watts but increases dampoing by a facto rof 10 and reduces distortion significanlty. There was an audible difference.
I decided to wait until I had the amps completely under control. There is still a buzz in the right one and you'll recall I had the wrong size bases. The bases I made myself are curing and the right channel amp is on the workbench.
I'm already wondering about tube-rolling and Auricaps. It never stops.

Report message to a moderator

[Message index]

		Calling Till E. By: Garland on Fri, 15 February 2002 07:00
		Re: Calling Till E. By: BillEpstein on Fri, 15 February 2002 10:34
		Re: Calling Till E. By: Garland on Fri, 15 February 2002 12:47

Previous Topic:	My CH-3's finally came in
Next Topic:	Ultra-high frequencies - unimportant?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Sep 12 04:13:33 CDT 2024