Home » Sponsored » Pi Speakers » Magnet wire re-visited
Re: Vicarious thrills [message #34954 is a reply to message #34953] Thu, 31 January 2002 18:44 Go to previous messageGo to previous message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
IC's are 1 meter Homegrown Silver Lace. The Official Interconnect of Audiogon.
Mapleshade says less than 8' sounds bad so I started there. Used to be you wanted to solder your amps output transformer leads to the speaker inputs and have longer IC's. Don't know whose right. I haven't tried short magnet wires, but will.
All this magnet wire stuff is an attempt to emulate the sound of 47 Labs OTA wire which is a 26 ga heavily teflon coated copper.After 100's of hours of break-in it;s supposee to be very special. $600. Also an Audiogon fave.
The Zobel is still attached with gators but I consider it permanent. I made the mistake of two tweaks at once. The bad effect was the wire, not the network.
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: ports and grills
Next Topic: Acoustic filter Q and PiAlign's "Qe"
Goto Forum:
  


Current Time: Wed Aug 07 00:25:51 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest