AudioRoundTable.com: Pi Speakers » jbl 2035's in quasi-pi

Home » Sponsored » Pi Speakers » jbl 2035's in quasi-pi

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: JBL T/S Specs [message #34893 is a reply to message #34890]

Fri, 25 January 2002 21:21

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

Thanks for reminding me about that file. I've seen you mention it a few times but I didn't realize it had the specs for the 2035. My copy is an old printed version from the 1980's and it doesn't list it.

According to published T/S specs, the JBL 2035 will work best in 1.5ft3 to 3.0ft3 cabinets tuned to 54Hz. PiAlign suggests 1.7ft3. Response is nice and flat but not too extended, the 3.0ft3 box has f3 of 50Hz and the 1.5ft3 box has f3 of 80Hz. This one is probably best used as a midwoofer and augmented with a sub.

Report message to a moderator

[Message index]

		jbl 2035's in quasi-pi By: Sam P. on Fri, 25 January 2002 13:07
		PiAlign'ed 2035's By: Wayne Parham on Fri, 25 January 2002 15:49
		JBL T/S Specs By: LuxmanLover on Fri, 25 January 2002 17:08
		Re: JBL T/S Specs By: Wayne Parham on Fri, 25 January 2002 21:21
		LOLOLOL By: LuxmanLover on Sat, 26 January 2002 05:18
		thanks wayne, printed your reply, By: Sam P. on Sat, 26 January 2002 10:53
		You have mail By: Wayne Parham on Sat, 26 January 2002 14:51
		wow, that was fast, By: Sam P. on Sat, 26 January 2002 15:14
		Compensation components By: Wayne Parham on Sat, 26 January 2002 15:35
		Re: jbl 2035's in quasi-pi By: Robert Hamel on Fri, 25 January 2002 21:05
		Re: jbl 2035's in quasi-pi By: tom clark on Sat, 26 January 2002 08:20
		Re: jbl 2035's in quasi-pi By: Robert Hamel on Sun, 27 January 2002 07:45

Previous Topic:	Is it true you can damage your hearing if ya exposed to over 90 db
Next Topic:	Theatre 4 Woofer RC network: I just removed it.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 17:34:33 CST 2024