(x2) Eminence Delta 15A 290-418
(x2) Eminence PSD2002-8 horn driver 290-442
(x2) Eminence H290 horn lens 290-554
(x2) Eminence pxb2-1k6 crossover 290-634
(x2) 8 ohm 100W non-inductive resistor 019-020
(x2) 20uF 250V polypro cap 027-436
(x16) 16 ohm 10W non-inductive resistor 004-16
(x2) .47uF 400V by-pass cap 027-458

Cabinets: I've already purchased the 3/4" MDF and 1"x2" bracing wood. I'll probably buy a Jasper Jig to cut the circles with my plunge router.

Binding Post: Any suggestions? Is a terminal cup necessary? What's good enough for Wayne is good enough for me.

Port Tube: I read in the archives that it would be okay to use 4"x4" PVC. True or false?

Damping Material: 2" fiber filler? What is this stuff? Does it have paper on the back like fiberglass? What's the model/brand so I can just ask for it at the building supply store.

Hookup Wire: I think that's what you'd call it (never built a speaker before). The stuff that'll go from the crossover to the drivers. Should I be using speaker wire? Any specific suggestions?

I think that should about cover it. Am I missing anything? Thanks in advance guys. I only knew enough to ask these questions after searching the archives, I just want to be positive before purchasing anything. Thanks in advance.

Kevin