AudioRoundTable.com: Pi Speakers » initial thoughts on my ten pi's...

Home » Sponsored » Pi Speakers » initial thoughts on my ten pi's...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: initial thoughts on my ten pi's... [message #34743 is a reply to message #34732]

Mon, 14 January 2002 17:39

mikebake
Messages: 243
Registered: May 2009

Grand Master

BTW Adam, my Behringer x-over has mute buttons for each driver/frequency range; my system is set up correctly, and I am using JBL drivers; if I mute the mid/highs and listen to just the woofers, it sounds wierd; I could easily draw the conclusion that the woofers are doing bad things.....I agree with the other post that you should not draw any conclusions without the highs present, and before the project is correctly completed. On my system, with just the woofs playing, muddy seems to be the operative word, but it's just the perception without the full range reproduced.. Hang in there and complete the project as closely to the design parameters as you can.

Report message to a moderator

[Message index]

		initial thoughts on my ten pi's... By: Adam on Sun, 13 January 2002 15:48
		pic By: Adam on Sun, 13 January 2002 18:42
		Ten π assembly - Bracing and foam filler By: Wayne Parham on Sun, 13 January 2002 22:05
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 08:06
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 11:20
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 15:32
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 20:19
		ahhh....... By: Adam on Tue, 15 January 2002 04:39
		Re: Ten π assembly - Bracing and foam filler By: tom clark on Tue, 15 January 2002 23:21
		Ten π horn participation in system response By: Wayne Parham on Wed, 16 January 2002 00:24
		Re: Ten π assembly - Bracing and foam filler By: BillEpstein on Mon, 14 January 2002 21:08
		Re: Ten π assembly - Bracing and foam filler By: Adam on Tue, 15 January 2002 04:42
		Don't even think about it By: JLapaire on Mon, 14 January 2002 05:25
		Re: initial thoughts on my ten pi's... By: mikebake on Mon, 14 January 2002 17:39

Previous Topic:	Impedance question for the smart guys
Next Topic:	Rear ports for PA speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Sep 12 18:32:54 CDT 2024