AudioRoundTable.com: Pi Speakers » initial thoughts on my ten pi's...

Home » Sponsored » Pi Speakers » initial thoughts on my ten pi's...

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Ten π assembly - Bracing and foam filler [message #34737 is a reply to message #34736]

Mon, 14 January 2002 11:20

Wayne Parham
Messages: 18759
Registered: January 2001

Illuminati (33rd Degree)

Do you mean the "Pi Alignment Theory" whitepaper? It is the only document I publish that has loudspeaker dimensions expressed as a series of ratios. All of the completed ten π plans have what is essentially a four π motor cabinet, and all displacements have been offset. So I can't think of any document I might have sent that has dimensions other than those. Are you talking about dimensions that the PiAlign program gives?

Report message to a moderator

[Message index]

		initial thoughts on my ten pi's... By: Adam on Sun, 13 January 2002 15:48
		pic By: Adam on Sun, 13 January 2002 18:42
		Ten π assembly - Bracing and foam filler By: Wayne Parham on Sun, 13 January 2002 22:05
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 08:06
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 11:20
		Re: Ten π assembly - Bracing and foam filler By: Adam on Mon, 14 January 2002 15:32
		Re: Ten π assembly - Bracing and foam filler By: Wayne Parham on Mon, 14 January 2002 20:19
		ahhh....... By: Adam on Tue, 15 January 2002 04:39
		Re: Ten π assembly - Bracing and foam filler By: tom clark on Tue, 15 January 2002 23:21
		Ten π horn participation in system response By: Wayne Parham on Wed, 16 January 2002 00:24
		Re: Ten π assembly - Bracing and foam filler By: BillEpstein on Mon, 14 January 2002 21:08
		Re: Ten π assembly - Bracing and foam filler By: Adam on Tue, 15 January 2002 04:42
		Don't even think about it By: JLapaire on Mon, 14 January 2002 05:25
		Re: initial thoughts on my ten pi's... By: mikebake on Mon, 14 January 2002 17:39

Previous Topic:	Impedance question for the smart guys
Next Topic:	Rear ports for PA speakers?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Sep 12 18:44:19 CDT 2024