AudioRoundTable.com: Pi Speakers » JBL tent sale

Home » Sponsored » Pi Speakers » JBL tent sale - JBL 2226J crossover values

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Pseudo first-order values [message #34687 is a reply to message #34685]

Thu, 10 January 2002 15:37

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

The L2 value is 0.7mH for the Professional Series four π loudspeakers.

Here are the values that are specified for various drivers used this way:

Woofer Motor Inductor L2
2205H 1.8mH, 5A
2226H 0.7mH, 10A
2227H 1.0mH, 10A

Now then, even though the 2226H uses a 0.7mH coil, if you were to simply remove the capacitor from your Eminence crossover, you would have a single 1.0mH coil and it sounds very good that way. There's only a 1dB difference above 1kHz, and none below that.

Report message to a moderator

[Message index]

		JBL tent sale - JBL 2226J crossover values By: spkrman57 on Thu, 10 January 2002 11:20
		Re: JBL 2226 crossover values By: Wayne Parham on Thu, 10 January 2002 12:24
		Re: JBL 2226 crossover values, Uh, Wayne? By: BillEpstein on Thu, 10 January 2002 13:02
		Pseudo first-order values By: Wayne Parham on Thu, 10 January 2002 15:37
		('Wayne, to himself', " how can I get across to this moron").... By: BillEpstein on Thu, 10 January 2002 17:17
		PX-BII1K6 By: Wayne Parham on Thu, 10 January 2002 20:59

Previous Topic:	Wayne... C5
Next Topic:	cornerhorns, more questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Dec 03 05:26:26 CST 2024