AudioRoundTable.com: Pi Speakers » rc network with active crossover?

Home » Sponsored » Pi Speakers » rc network with active crossover?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: rc network with active crossover? [message #34659 is a reply to message #34657]

Tue, 08 January 2002 03:17

jlharden
Messages: 94
Registered: May 2009

Viscount

Hi Mike!

Thanks for butting in here! I'm very interested your opinion because you have direct experience with the SB horns. Have you ever used (or heard) a JBL 2426 in conjunction with the SB Baby Grand? I'm wondering what I could expect with these and what a far more expensive part as the TAD 2001 would offer as compared to the JBL 1" driver. Thanks again! Jerrod

Report message to a moderator

[Message index]

		rc network with active crossover? By: jlharden on Mon, 07 January 2002 15:39
		Re: rc network with active crossover? By: Wayne Parham on Mon, 07 January 2002 16:00
		Re: rc network with active crossover? By: jlharden on Tue, 08 January 2002 03:21
		Re: rc network with active crossover? By: Wayne Parham on Sun, 03 March 2002 00:19
		compensation network can still be used By: Sam P. on Mon, 07 January 2002 18:08
		Re: rc network with active crossover? By: Mike Bates on Mon, 07 January 2002 21:31
		Re: rc network with active crossover? By: jlharden on Tue, 08 January 2002 03:17
		Re: rc network with active crossover? By: Mike Bates on Tue, 08 January 2002 06:54
		Sierra Brooks special 500Hz horns for TAD 2001s. By: steve jones on Sat, 12 January 2002 17:48
		Hybrid horn flares By: Wayne Parham on Sat, 12 January 2002 21:27

Previous Topic:	horn cutting adventure, murphy helped too!
Next Topic:	JBL flat frame loudspeakers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 22:42:32 CST 2024