AudioRoundTable.com: Pi Speakers » Is this horn flare suitable for PSD2002?

Home » Sponsored » Pi Speakers » Is this horn flare suitable for PSD2002?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Is this horn flare suitable for PSD2002? [message #34562 is a reply to message #34560]

Fri, 28 December 2001 03:08

Super_BQ
Messages: 37
Registered: May 2009

Baron

I've looked at the Sammi line of horn flares then found that they are a little different than the CH-3, 2370, or H-290 flares.

The Sammi SH350 is a bolt on exponential horn similar to what is required for the Theater 4 Pi's however, it's dispersion is quite different. It offers a 120�H x 90�V with a cut-off freq. of 600 Hz. I believe the 2370 and similar flares use a 90� X 40� dispersion.

Wayne, what effect would using the SH350 wide dispersion have over the typical 2370 size horn flare for the Theater 4 Pi?

Report message to a moderator

[Message index]

		Is this horn flare suitable for PSD2002? By: hjeon on Fri, 28 December 2001 00:56
		Re: Is this horn flare suitable for PSD2002? By: Wayne Parham on Fri, 28 December 2001 01:32
		Re: Is this horn flare suitable for PSD2002? By: Super_BQ on Fri, 28 December 2001 03:08
		Re: Is this horn flare suitable for PSD2002? By: Wayne Parham on Fri, 28 December 2001 10:20

Previous Topic:	All the T-S parameters for every JBL, OH BOY!
Next Topic:	Wayne, double loading

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 20:06:04 CDT 2024