AudioRoundTable.com: Pi Speakers » Question for Wayne: Eminence Stock Xover

Home » Sponsored » Pi Speakers » Question for Wayne: Eminence Stock Xover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Question for Wayne: Eminence Stock Xover [message #34426 is a reply to message #34424]

Sat, 15 December 2001 18:50

Wayne Parham
Messages: 18764
Registered: January 2001

Illuminati (33rd Degree)

You're right, the Zobel is mounted off-board. Mount resistor R3 on the interior floor of the cabinet, and run wires up to the woofer, using spade lugs to connect to it. R3 is an 8 ohm, 100 watt resistor, part number 019-020 at Parts Express. They cost ten bucks and mount very nicely to the bottom of your cabinet with a couple of wood screws. C5 is a 20uF, 250V polypropylene capacitor. You can use Parts Express number 027-436.

Report message to a moderator

[Message index]

		Question for Wayne: Eminence Stock Xover By: Garland on Sat, 15 December 2001 17:56
		Re: Question for Wayne: Eminence Stock Xover By: Wayne Parham on Sat, 15 December 2001 18:50
		C5, R3? Huh? By: BillEpstein on Sat, 15 December 2001 19:06
		1K6alxxdB By: Wayne Parham on Sat, 15 December 2001 19:49

Previous Topic:	Compressed fiber carpet pad for cabinet damping?
Next Topic:	SONY XS-L1035 in ported?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 16 14:41:03 CDT 2024