AudioRoundTable.com: Pi Speakers » pushin' Eminence 1" to 1.2KHz

Home » Sponsored » Pi Speakers » pushin' Eminence 1" to 1.2KHz - how well does it work?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: MD2001 - Good down to 1Khz; PSD2002 - Altec horns [message #34417 is a reply to message #34414]

Sat, 15 December 2001 13:42

freddyi
Messages: 48
Registered: May 2009

Baron

Hi Wayne and group!

thanks for the reply (wow - great image by Adam!!)

-looked at my old graphs of the Eminence CD-8 without network on Altec horns - 811 has a LF corner just ~ 500Hz and 511 somewhat below 400Hz ~1/2 octave so these old horns should provide some decent loading. btw - a PV CH-2 looked real smooth - not sure about the compensation needed - surprisingly, it measured very extended in HF - sounded kinda laid-back - is CH-2 considered CD?

Very Best!
Freddy

Report message to a moderator

[Message index]

		pushin' Eminence 1" to 1.2KHz - how well does it work? By: freddyi on Sat, 15 December 2001 11:29
		MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Wayne Parham on Sat, 15 December 2001 12:01
		Re: MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Adam on Sat, 15 December 2001 12:56
		Cool rendered image! By: Wayne Parham on Sat, 15 December 2001 13:29
		Re: MD2001 - Good down to 1Khz; PSD2002 - Altec horns By: freddyi on Sat, 15 December 2001 13:42
		Peavey horns By: Wayne Parham on Sat, 15 December 2001 14:08
		Re: Peavey horns - maybe mine are CH-3? By: freddyi on Sat, 15 December 2001 14:23
		Nope. Yours are bigger. By: Wayne Parham on Sat, 15 December 2001 14:32

Previous Topic:	Crossover Distortion
Next Topic:	Compressed fiber carpet pad for cabinet damping?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 01:51:26 CST 2024