AudioRoundTable.com: Pi Speakers » pushin' Eminence 1" to 1.2KHz

Home » Sponsored » Pi Speakers » pushin' Eminence 1" to 1.2KHz - how well does it work?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

MD2001 - Good down to 1Khz; PSD2002 - Slightly higher [message #34414 is a reply to message #34413]

Sat, 15 December 2001 12:01

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

I think you'll be OK with 1.2kHz crossover point, certainly if over 2nd or 3rd order. The MD2001 is good to 1kHz, the PSD2002 a little higher. I cross mine over at 1.6kHz third-order but 1.2kHz is probably OK if the horn loads there and the slope is high enough.

Report message to a moderator

[Message index]

		pushin' Eminence 1" to 1.2KHz - how well does it work? By: freddyi on Sat, 15 December 2001 11:29
		MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Wayne Parham on Sat, 15 December 2001 12:01
		Re: MD2001 - Good down to 1Khz; PSD2002 - Slightly higher By: Adam on Sat, 15 December 2001 12:56
		Cool rendered image! By: Wayne Parham on Sat, 15 December 2001 13:29
		Re: MD2001 - Good down to 1Khz; PSD2002 - Altec horns By: freddyi on Sat, 15 December 2001 13:42
		Peavey horns By: Wayne Parham on Sat, 15 December 2001 14:08
		Re: Peavey horns - maybe mine are CH-3? By: freddyi on Sat, 15 December 2001 14:23
		Nope. Yours are bigger. By: Wayne Parham on Sat, 15 December 2001 14:32

Previous Topic:	Crossover Distortion
Next Topic:	Compressed fiber carpet pad for cabinet damping?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 01:52:53 CST 2024