AudioRoundTable.com: Pi Speakers » Darn it ! This shoulda worked !

Home » Sponsored » Pi Speakers » Darn it ! This shoulda worked !

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Crossovers for Piezo's [message #34350 is a reply to message #34349]

Fri, 07 December 2001 05:10

Wayne Parham
Messages: 18792
Registered: January 2001

Illuminati (33rd Degree)

If you use a resistive voltage divider, the padding resistors act as the load to the amplifier, and they add to the source impedance from the perspective of the load. In the case of the piezo tweeter, the load is primarily capacitive. Because of that, I would use a switched capacitor of 0.1uF to 0.33uF. That would more closely provide the characteristics you are trying to achieve. See the thread called "Pi implementations of quartz piezoelectric tweeters"
Report message to a moderator

[Message index]

		Darn it ! This shoulda worked ! By: Andy G on Thu, 06 December 2001 16:23
		Re: Darn it ! This shoulda worked ! By: Wayne Parham on Thu, 06 December 2001 19:02
		Re: Darn it ! This shoulda worked ! By: Andy G on Thu, 06 December 2001 20:18
		Crossovers for Piezo's By: Wayne Parham on Fri, 07 December 2001 05:10
		How about a capacitive divider network? By: Jeff Robinson on Sat, 08 December 2001 15:26

Previous Topic:	P.audio
Next Topic:	Question for Till E.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Dec 02 14:16:21 CST 2024