Home » Sponsored » Pi Speakers » HT subwoofer is done; anyone remember "The Wrong ...
HT subwoofer is done; anyone remember "The Wrong ... [message #34348] Thu, 06 December 2001 20:01 Go to previous message
BillEpstein is currently offline  BillEpstein
Messages: 886
Registered: May 2009
Illuminati (2nd Degree)
....Box"?
I ordered the surplus Klipsch 10" woof with an Fs of 32 and built the 1.62 cu ft box. Got the woof and decided I should have ordered the Dayton Titanic 12" in the first place. Back went the Klipsch, Titanic sailed in to port today. Fs is 16 but I put it in the box anyway. Both Boxplot and WinSD say 10 cu. ft. Kinda critically under done, right Wayne? But I don't want another 36X24X20 box in the tv room unless it's a TV stand and the little (!) 22X16X13 fits in the corner real nice. Data sheet says the Kevlar spider takes forever to break in but right away the Titanic goes deep and loud on the explosions. You can really feel it in the chestal region. The $79 plate amp is a treat, too. Feeds 150 watts to the 4ohm Titanic with polarity switch, 40 to 160 Hz crossover and the usual line and speaker connections. So I've got $240 in this thing and it's cooking. Maybe I should get 2 more and have them fire out the sides of the Theatre 4 Pi's! 3dB down= 16.5 Hz! Yowza!
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Question for Till E.
Next Topic: Steve f/listening room
Goto Forum:
  


Current Time: Mon Oct 14 18:20:24 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest