AudioRoundTable.com: Pi Speakers » Pyle W820's in a one Pi alignment

Home » Sponsored » Pi Speakers » Pyle W820's in a one Pi alignment

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Here are TS para from Pyle [message #33620 is a reply to message #33605]

Tue, 31 July 2001 11:36

Paul C.
Messages: 218
Registered: May 2009

Master

Your woofer was formerly listed as W8C200F.

Fs = 44.1 hz
Re = 6.29 ohms
Z ohms @ 400 hz = 7.3 ohms
Zmin = 7.1 ohms @ 289 hz
Qms = 9.422
Qes = .345
Qts = .333
X lin = .150"
Vas = 1.7 cu ft
Pe = 70 Watts RMS
SPL = 95 db/wt/mt

Another chart received at the same time recommends:

Sealed enclosure .5 cu ft
Ported enclosure 1.1 cu ft w/ port = 2.5" dia x 1.5" long

Hope this info helps.

Paul

Report message to a moderator

[Message index]

		Pyle W820's in a one Pi alignment By: BobCat on Wed, 25 July 2001 21:57
		Re: Pyle W820's in a one Pi alignment By: Paul C. on Wed, 25 July 2001 22:27
		Re: Pyle W820's in a one Pi alignment By: Wayne Parham on Thu, 26 July 2001 01:58
		Pyle T-S sheets By: Paul C. on Thu, 26 July 2001 08:16
		Re: Pyle T-S sheets By: Wayne Parham on Thu, 26 July 2001 18:54
		Here are TS para from Pyle By: Paul C. on Tue, 31 July 2001 11:36

Previous Topic:	Yet more 4 Pi questions
Next Topic:	Update on my Four Pi Pro. speaker project.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Oct 17 23:36:52 CDT 2024