AudioRoundTable.com: Pi Speakers » piAlign software and figuring Zmax

Home » Sponsored » Pi Speakers » piAlign software and figuring Zmax

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: piAlign software and figuring Zmax [message #33249 is a reply to message #33248]

Fri, 27 April 2001 12:24

Wayne_Parham
Messages: 123
Registered: May 2009

Master

PiAlign suggests a 4 cubic foot cabinet tuned to 37Hz for the TAD 1602. So the Pi cornerhorn bass bin for it is a little over three feet tall. Bracing, wood thickness, the port and drivers inside displace some volume, so the cabinet is made large enough to compensate.

About finding Zmax from electro-mechanical parameters, I never really thought about it but, yes, you should be able to backsolve Zmax when other parameters are known. You might check the popular T/S modeling programs and see if any of them calculate an electrical impedance chart.

Report message to a moderator

[Message index]

		piAlign software and figuring Zmax By: juanstein on Fri, 27 April 2001 11:06
		Re: piAlign software and figuring Zmax By: Wayne_Parham on Fri, 27 April 2001 12:24
		Re: piAlign software and figuring Zmax By: juanstein on Fri, 27 April 2001 16:48
		Port shapes By: Wayne_Parham on Fri, 27 April 2001 18:29

Previous Topic:	wayne, you da man!!!!!
Next Topic:	Anybody have some Pi's in the SF bay area they want to show off to me?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jul 17 20:21:24 CDT 2025