Home » Sponsored » Pi Speakers » Are all screw-on piezo horn drivers similar ?
Re: Are all screw-on piezo horn drivers similar ? [message #33110 is a reply to message #33109] Fri, 30 March 2001 16:01 Go to previous messageGo to previous message
Wayne_Parham is currently offline  Wayne_Parham
Messages: 123
Registered: May 2009
Master
You mentioned piezo's, and so I grabbed a moment to post a spec sheet. The specs for the KSN 1038, 1041 and 1056 are shown above. Pay particular attention to the frequency response curve and distortion specs - the response is quite linear and distortion at 4v is only about 1%. So even though it's a "cheapie" - its performance is good. It isn't the same as the screw-on units, but thought you might be interested in the data sheet anyway.


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Bellingham?
Next Topic: Probable dumb question - Where's the midrange driver?
Goto Forum:
  


Current Time: Fri Nov 29 02:02:14 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest