AudioRoundTable.com: Group Build » 300B SE Project, Part 9 - E180F, E280F, D3a pentodes

Home » Audio » Group Build » 300B SE Project, Part 9 - E180F, E280F, D3a pentodes - triode connected

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Correction! [message #32203 is a reply to message #31846]

Fri, 29 August 2008 04:33

matrix
Messages: 2
Registered: May 2009

Esquire

Dear Damir (and everybody else).....

can anybody tell me if it will be possible for the E180F to drive 2 2A3 tubes in parallel....
i know that the capacitance of the output tubes is a bit of a problem - maybe better to use E280F but still i want to know if it will be possible to drive PSE with 2A3's using E180F........
any opinions
thanks in advance....

Report message to a moderator

[Message index]

		300B SE Project, Part 9 - E180F, E280F, D3a pentodes - triode connected By: Damir on Thu, 09 March 2006 13:19
		Re: 300B SE Project, Part 9 - E180F, E280F, D3a pentodes - triode connected By: Wayne Parham on Fri, 10 March 2006 14:20
		Re: 300B SE Project, Part 9 - E180F, E280F, D3a pentodes - triode connected By: Damir on Fri, 10 March 2006 15:06
		Correction! By: Damir on Mon, 27 March 2006 04:43
		Re: Correction! By: matrix on Fri, 29 August 2008 04:33

Previous Topic:	questions re 300b group build
Next Topic:	E180F, E280F driving 2A3 PSE

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 06 17:55:53 CDT 2024