AudioRoundTable.com: Group Build » Group Build Line Array Project

Home » Audio » Group Build » Group Build Line Array Project

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Routing Out The Front Baffles [message #32092 is a reply to message #32085]

Thu, 26 October 2006 21:10

Forty2wo
Messages: 163
Registered: May 2009

Master

If you are using a drill press, with either a hole saw or fly cutter. Mount a temp say 2’x4’ MDF table to your press. Now you can clamp a fence to it, slide your baffle along it and maintain perfect horizontal alignment.

My recessed drivers, are very close together. I scribed a vertical line, then walked off the centers with a pair of divider’s…John

Report message to a moderator

[Message index]

		Group Build Line Array Project By: FredT on Thu, 12 October 2006 15:41
		Re: Group Build Line Array Project By: Shane on Thu, 12 October 2006 20:02
		Re: Group Build Line Array Project By: FredT on Fri, 13 October 2006 05:42
		Re: Group Build Line Array Project By: colinhester on Fri, 13 October 2006 14:36
		Re: Group Build Line Array Project By: Wayne Parham on Sat, 14 October 2006 13:00
		Re: Group Build Line Array Project By: FredT on Sat, 14 October 2006 17:56
		Re: Group Build Line Array Project By: Wayne Parham on Sat, 14 October 2006 20:19
		Re: Group Build Line Array Project By: cfranz on Mon, 16 October 2006 09:02
		WAF By: FredT on Mon, 16 October 2006 10:01
		Re: WAF By: cfranz on Mon, 16 October 2006 10:14
		Re: WAF By: FredT on Tue, 17 October 2006 04:27
		Re: Group Build Line Array Project By: FredT on Tue, 24 October 2006 15:27
		Re: Group Build Line Array Project By: Wayne Parham on Tue, 24 October 2006 16:20
		Re: Group Build Line Array Project By: Shane on Tue, 24 October 2006 21:45
		Routing Out The Front Baffles By: FredT on Wed, 25 October 2006 11:34
		Re: Routing Out The Front Baffles By: Shane on Wed, 25 October 2006 13:12
		Re: Routing Out The Front Baffles By: colinhester on Wed, 25 October 2006 13:54
		Re: Routing Out The Front Baffles By: Forty2wo on Thu, 26 October 2006 21:10
		Re: Routing Out The Front Baffles By: FredT on Wed, 25 October 2006 14:25
		Jasper jig By: Shane on Wed, 25 October 2006 19:16
		Re: Jasper jig By: FredT on Thu, 26 October 2006 10:43
		Re: Jasper jig By: Shane on Thu, 26 October 2006 13:10
		Re: Jasper jig By: FredT on Thu, 26 October 2006 13:51
		Parts Expreess Group Build Discount By: FredT on Fri, 27 October 2006 12:46
		Re: Parts Expreess Group Build Discount By: Shane on Tue, 31 October 2006 20:19
		Done! By: FredT on Mon, 30 October 2006 13:43
		Re: Done! By: colinhester on Mon, 30 October 2006 15:01
		Re: Done! By: FredT on Tue, 31 October 2006 04:35
		Re: Done! By: Wayne Parham on Tue, 31 October 2006 16:02
		Re: Done! By: Shane on Mon, 30 October 2006 20:44
		Re: Done! By: FredT on Tue, 31 October 2006 04:43
		Power Requirements By: FredT on Tue, 31 October 2006 08:55
		Re: Power Requirements By: Shane on Tue, 31 October 2006 11:55
		NAD 320BEE By: FredT on Tue, 31 October 2006 15:17
		Re: NAD 320BEE By: Shane on Tue, 31 October 2006 20:14
		Next Steps By: FredT on Wed, 01 November 2006 08:34
		11/9 Status Report By: FredT on Thu, 09 November 2006 06:26
		Update please By: Francois G on Mon, 05 March 2007 14:04
		Re: Update please By: FredT on Mon, 05 March 2007 14:22

Previous Topic:	Smith horns
Next Topic:	AudioRoundTable Group Build Room?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 02:26:04 CST 2024