AudioRoundTable.com: Group Build » A little help posting a schematic

Home » Audio » Group Build » A little help posting a schematic

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

There we go [message #32043 is a reply to message #32042]

Fri, 29 September 2006 08:20

Forty2wo
Messages: 163
Registered: May 2009

Master

Thanks Wayne,
The outputs are Dynaco A-470's from a ST-70.The 6a5-G will run a bit harder then a 2A3 or 6B4. I should get about 10 watts with cathode bias...John

Report message to a moderator

[Message index]

		A little help posting a schematic By: Forty2wo on Thu, 28 September 2006 22:01
		Re: A little help posting a schematic By: Wayne Parham on Thu, 28 September 2006 22:18
		There we go By: Forty2wo on Fri, 29 September 2006 08:20
		Re: There we go By: Wayne Parham on Fri, 29 September 2006 09:26
		Re: There we go By: Norris Wilson on Sat, 30 September 2006 23:47
		Some Corrections and clarifications By: Forty2wo on Mon, 02 October 2006 22:05
		Re: Some Corrections and clarifications By: Brucie on Tue, 03 October 2006 16:42
		Re: Some Corrections and clarifications By: Forty2wo on Tue, 03 October 2006 21:53
		Re: Some Corrections and clarifications By: Brucie on Tue, 03 October 2006 22:28
		Re: Some Corrections and clarifications By: Forty2wo on Wed, 04 October 2006 22:02

Previous Topic:	The Finished 6A5
Next Topic:	The "Evil" Dr. Brown

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Sep 03 04:54:30 CDT 2024