AudioRoundTable.com: Group Build

Home » Audio » Group Build » Bias supply

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

MOSFET D-S voltage [message #31716 is a reply to message #31714]

Wed, 25 January 2006 14:42

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

Hey-Hey!!!,
I think Damir answered all but the capacitanceone. Go to the Fairchild Semiconductor site, and download the data sheet for the IRF820. Scroll down to the chart with che capacitance. The caacitance is greatest at low drain-source voltages and levels off after about 10V or so. Hence the 20V recomendation.

On heatsinks, anything is a bit ov a pain compared to bare TO-220's for me. But I am a bit on the lazy side. It shows everywhere: simple PP circuits, simple linestage circuits...nothing too complicated anywhere...:)
cheers,
Douglas

Report message to a moderator

[Message index]

		Bias supply By: PakProtector on Sat, 21 January 2006 06:30
		the Schematic By: PakProtector on Tue, 24 January 2006 09:55
		Re: the Schematic By: Damir on Tue, 24 January 2006 15:21
		Re: the Schematic By: 2wo on Tue, 24 January 2006 16:36
		Re: the Schematic By: PakProtector on Tue, 24 January 2006 17:03
		Re: Bias supply By: Manualblock on Wed, 25 January 2006 10:01
		Re: Bias supply By: Damir on Wed, 25 January 2006 13:49
		Re: Bias supply By: Manualblock on Wed, 25 January 2006 16:11
		Re: Bias supply By: Damir on Wed, 25 January 2006 23:28
		Re: Bias supply By: Manualblock on Thu, 26 January 2006 07:59
		Re: Bias supply By: Damir on Thu, 26 January 2006 11:17
		Re: Bias supply By: Manualblock on Thu, 26 January 2006 12:40
		Re: Bias supply By: Damir on Thu, 26 January 2006 13:04
		Re: Bias supply By: Manualblock on Thu, 26 January 2006 15:03
		Should you consider Anything involving high voltages novice work? By: Old Brown Eyes on Thu, 26 January 2006 13:14
		Re: Should you consider Anything involving high voltages novice work? By: Manualblock on Thu, 26 January 2006 15:02
		Latest Seth schematic By: Old Brown Eyes on Fri, 27 January 2006 05:55
		Re: Latest Seth schematic By: PakProtector on Fri, 27 January 2006 09:19
		Re: Latest Seth schematic By: Manualblock on Fri, 27 January 2006 09:22
		yes it does... By: PakProtector on Fri, 27 January 2006 13:30
		Re: yes it does... By: Jeff Lessard on Tue, 31 January 2006 12:53
		Re: yes it does... By: PakProtector on Tue, 31 January 2006 16:47
		Re: Should you consider Anything involving high voltages novice work? By: PakProtector on Thu, 26 January 2006 18:08
		patience... By: PakProtector on Thu, 26 January 2006 18:18
		Re: patience... By: Manualblock on Thu, 26 January 2006 20:56
		Galahad Amp By: Wayne Parham on Fri, 27 January 2006 09:11
		Re: Galahad Amp By: Manualblock on Fri, 27 January 2006 09:22
		Re: Galahad Amp By: PakProtector on Fri, 27 January 2006 09:27
		Re: Galahad Amp By: Wayne Parham on Fri, 27 January 2006 10:37
		Re: Bias supply By: 2wo on Sun, 29 January 2006 18:22
		ooooohhhh! neat By: PakProtector on Tue, 31 January 2006 17:13
		simple circuits By: PakProtector on Wed, 01 February 2006 17:42
		MOSFET D-S voltage By: PakProtector on Wed, 25 January 2006 14:42

Previous Topic:	In the proper Tube tradition...
Next Topic:	inductor winding and bobbins

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 23:14:27 CST 2024