AudioRoundTable.com: Group Build » Received Grid-Chokes

Home » Audio » Group Build » Received Grid-Chokes

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: OEM bobbins for AMCC 8 core assembly [message #31646 is a reply to message #31643]

Tue, 20 December 2005 07:33

Damir
Messages: 1005
Registered: May 2009

Illuminati (2nd Degree)

Good info, thanks. I`m still expecting the answer from AE. I don`t know enough about transformers/chokes making, and can`t say is wider bobin then core some design choice that doesn`t "threat" the performance here, or is it a large mistake?!
From this reason, I`d like to have a complete set of data...and good communication with manufacturer...and low price...and...

About mounting this core/choke - I didn`t have experience with this core material before, very thin layers and mechanicaly fragile (core and winding). I think that rubber/plastic combination didn`t stress our sensitive choke too much...

Unfortunately, I don`t have a measuring devices for thorough test...

Report message to a moderator

[Message index]

		Received Grid-Chokes By: Damir on Fri, 16 December 2005 10:51
		sweet... By: PakProtector on Fri, 16 December 2005 15:52
		Re: sweet... By: Damir on Sat, 17 December 2005 08:33
		Re: sweet... By: PakProtector on Sat, 17 December 2005 08:51
		Re: sweet... By: Damir on Sat, 17 December 2005 09:47
		I love an elegant solution…John (nt) By: Forty2wo on Sun, 18 December 2005 17:41
		Re: sweet... By: MQracing on Mon, 19 December 2005 09:10
		Re: sweet... By: Damir on Mon, 19 December 2005 14:15
		Re: sweet... By: MQracing on Mon, 19 December 2005 18:05
		Received the response from AE By: Damir on Wed, 21 December 2005 05:25
		OEM bobbins for AMCC 8 core assembly By: MQracing on Tue, 20 December 2005 06:24
		Re: OEM bobbins for AMCC 8 core assembly By: Damir on Tue, 20 December 2005 07:33
		Re: OEM bobbins for AMCC 8 core assembly By: MQracing on Tue, 20 December 2005 07:53
		Re: sweet... By: MQracing on Mon, 19 December 2005 09:10
		Re: sweet... By: MQracing on Mon, 19 December 2005 09:10
		an alternative design By: MQracing on Tue, 20 December 2005 07:21
		Re: an alternative design By: Damir on Tue, 20 December 2005 07:48
		Re: an alternative design By: MQracing on Tue, 20 December 2005 07:59
		what tube are you using? By: MQracing on Tue, 20 December 2005 08:13
		if I may expand on a theme.... By: MQracing on Tue, 20 December 2005 08:53
		Re: what tube are you using? By: Damir on Tue, 20 December 2005 11:21
		correction of a typo.... By: MQracing on Tue, 20 December 2005 08:22
		Re: an alternative design By: PakProtector on Tue, 20 December 2005 17:43
		core geometries and materials By: MQracing on Wed, 21 December 2005 07:20
		Re: core geometries and materials By: PakProtector on Wed, 21 December 2005 14:32
		Re: core geometries and materials By: PakProtector on Sat, 24 December 2005 18:43
		mounting brackets for AMCC 8 core assembly By: MQracing on Tue, 20 December 2005 06:20

Previous Topic:	an invitation
Next Topic:	Small HV caps, and pentodes driving power triodes

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Feb 16 08:34:14 CST 2025