AudioRoundTable.com: Group Build » Resistor choices for SV811 project

Home » Audio » Group Build » Resistor choices for SV811 project

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Resistor choices for SV811 project [message #31568 is a reply to message #31567]

Tue, 06 December 2005 12:16

Damir
Messages: 1005
Registered: May 2009

Illuminati (2nd Degree)

Hi, Colin - yes, you can use "Kiwame" CF everywhere. I personally use metal film (non-flammable) in PS, but it`s minor (and personal) point.
Bleeders - 470k/2W would be fine for HV, and you don`t need to use them in filament 6,3V PS - 56000µ caps would "bleed" across permanently connected filaments, after turn off.

Report message to a moderator

[Message index]

		Resistor choices for SV811 project By: colinhester on Tue, 06 December 2005 08:16
		Re: Resistor choices for SV811 project By: Damir on Tue, 06 December 2005 12:16
		Re: Resistor choices for SV811 project By: Norris Wilson on Tue, 06 December 2005 15:05
		Thanks By: colinhester on Wed, 07 December 2005 10:58
		Re: Resistor choices for SV811 project By: PakProtector on Tue, 06 December 2005 15:59
		Re: Resistor choices for SV811 project By: 2wo on Tue, 06 December 2005 16:21
		Re: Resistor choices for SV811 project By: Damir on Wed, 07 December 2005 06:21
		Warning, Will Robinson By: colinhester on Wed, 07 December 2005 11:01
		Damir is right as usual By: 2wo on Wed, 07 December 2005 22:06
		Bleeders By: colinhester on Wed, 07 December 2005 11:09

Previous Topic:	The shunt capacitance of grid and anode chokes
Next Topic:	C-Core grid chokes

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 08:57:56 CST 2024