AudioRoundTable.com: Group Build » troubleshooting continued.

Home » Audio » Group Build » troubleshooting continued.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

troubleshooting continued. [message #30913]

Thu, 10 March 2005 15:52

Manualblock
Messages: 4973
Registered: May 2009

Illuminati (13th Degree)

So the LED's one side is very bright and steady independent of the volume pot; the other side is of lower intensity and will adjust with rotation of the pot. I backed off on the R3 variable to no avail, same thing even backed down all the way. Any thought's?

Report message to a moderator

[Message index]

		troubleshooting continued. By: Manualblock on Thu, 10 March 2005 15:52
		Current between ground and plate? By: colinhester on Thu, 10 March 2005 16:05
		Re: Current between ground and plate? By: Manualblock on Thu, 10 March 2005 18:33
		Measuring current By: colinhester on Thu, 10 March 2005 18:50
		Re: Measuring current By: PakProtector on Thu, 10 March 2005 21:20
		How much difference? By: colinhester on Fri, 11 March 2005 08:48
		Re: How much difference? By: PakProtector on Fri, 11 March 2005 09:01
		Re: troubleshooting continued. By: PakProtector on Thu, 10 March 2005 16:26
		Re: troubleshooting continued. By: Manualblock on Thu, 10 March 2005 18:27
		that's the funny part... By: PakProtector on Thu, 10 March 2005 18:50
		Re: that's the funny part... By: Manualblock on Fri, 11 March 2005 09:20
		Re: that's the funny part... By: PakProtector on Fri, 11 March 2005 09:36
		Re: that's the funny part... By: Manualblock on Fri, 11 March 2005 11:42
		198DCV from B+ to B- for Guinevere By: colinhester on Thu, 10 March 2005 21:31
		Re: 198DCV from B+ to B- for Guinevere By: Manualblock on Fri, 11 March 2005 09:19

Previous Topic:	Carbon comp vs carbon as grid stoppers
Next Topic:	Call this evening

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Dec 12 11:55:56 CST 2024