AudioRoundTable.com: Group Build » Carbon comp vs carbon as grid stoppers

Home » Audio » Group Build » Carbon comp vs carbon as grid stoppers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Noise [message #30897 is a reply to message #30892]

Wed, 09 March 2005 13:58

Forty2wo
Messages: 163
Registered: May 2009

Master

As a professional service Engineer, I well know how dificult it can be to to track down the source of a problem. It can be a real bitch to find something you can hang your hat on. You have to trust your instincts.
So far you have found two separate indacations of a bad vol pot. In my mind, it's out of there. Maybe it's just a bad solder joint but for five bucks, it's not worth it. While your at it replace the grid resitors. you'll feel better...John

Report message to a moderator

[Message index]

		Carbon comp vs carbon as grid stoppers By: colinhester on Wed, 09 March 2005 00:09
		Re: Carbon comp vs carbon as grid stoppers By: PakProtector on Wed, 09 March 2005 04:34
		Re: Carbon comp vs carbon as grid stoppers By: Manualblock on Wed, 09 March 2005 08:08
		Noise By: colinhester on Wed, 09 March 2005 08:52
		Re: Noise By: GarMan on Wed, 09 March 2005 10:06
		Noise increases By: colinhester on Wed, 09 March 2005 10:43
		Re: Noise increases By: Wayne Parham on Wed, 09 March 2005 14:01
		Re: Noise increases By: GarMan on Thu, 10 March 2005 13:41
		Erector Set By: colinhester on Thu, 10 March 2005 14:45
		Re: Noise By: Forty2wo on Wed, 09 March 2005 13:58

Previous Topic:	progress
Next Topic:	troubleshooting continued.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Dec 12 09:44:46 CST 2024