AudioRoundTable.com: Group Build » Mounting Coupling caps

Home » Audio » Group Build » Mounting Coupling caps

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Mounting Coupling caps [message #30787 is a reply to message #30784]

Wed, 02 March 2005 15:14

Thrint
Messages: 43
Registered: May 2009

Baron

I keep them in the same location and orientation, but glue them to the underside of the chassis with JB Weld. It requires a thicker base x-section...

I suspect that your method would work just fine with JB Quick instead of Silicone. That 2-part is tough stuff. Just clean thoroughly first.
regards,
Douglas

Report message to a moderator

[Message index]

		Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 12:25
		Re: Mounting Coupling caps By: Thrint on Wed, 02 March 2005 15:14
		Re: Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 16:41
		Re: Mounting Coupling caps By: Thrint on Wed, 02 March 2005 17:51
		Re: Mounting Coupling caps By: Manualblock on Wed, 02 March 2005 18:54
		Cap polarity By: colinhester on Wed, 02 March 2005 19:11
		Re: Cap polarity By: Manualblock on Wed, 02 March 2005 19:34
		Re: Cap polarity By: Thrint on Wed, 02 March 2005 20:06
		Re: Cap polarity By: Manualblock on Wed, 02 March 2005 20:12
		No problem By: PakProtector on Thu, 03 March 2005 15:02

Previous Topic:	Guinevere LIVES
Next Topic:	Filament Caps

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 12:46:12 CST 2024