AudioRoundTable.com: Group Build » Psud II / PC problems

Home » Audio » Group Build » Psud II / PC problems

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: first cut... [message #30577 is a reply to message #30576]

Thu, 17 February 2005 12:36

Damir
Messages: 1005
Registered: May 2009

Illuminati (2nd Degree)

Huh, little dissapointed, but try some variations on the theme, for example little cap in front of the first choke... Obviously, I need at least 375 or (400V - "Guinevere"!) for 310V out (2A3/6B4G).
In version II, I need about 430V (CLCLC), little first C, say 10-15uF.
In the real experiments with 340-0-340V and CLC I get about 420V/100mA with GZ34.

Report message to a moderator

[Message index]

		Psud II / PC problems By: Damir on Thu, 17 February 2005 09:16
		Re: Psud II / PC problems By: PakProtector on Thu, 17 February 2005 11:08
		Re: Psud II / PC problems By: Damir on Thu, 17 February 2005 11:25
		first cut... By: PakProtector on Thu, 17 February 2005 12:29
		Re: first cut... By: Damir on Thu, 17 February 2005 12:36
		using some Round numbers... By: PakProtector on Thu, 17 February 2005 12:43
		Re: using some Round numbers... By: Damir on Thu, 17 February 2005 13:09

Previous Topic:	Silver Lining
Next Topic:	Wiring the variable resistor

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 27 04:28:44 CDT 2024