AudioRoundTable.com: Group Build

Home » Audio » Group Build » C1, 4.7uF cap

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: C1, 4.7uF cap [message #30222 is a reply to message #30221]

Sat, 22 January 2005 19:46

PakProtector
Messages: 935
Registered: May 2009

Illuminati (2nd Degree)

No problem! I like the ASC motor run. 440VAC/7.5 uF at ~$8 each from Allied Electronics. Slight preference to the lower voltage versions, but at a slight size penalty. It is what I have been running since Rev. 2 and I have tried a bunch of things. The ASC keep going back in.
regards,
Douglas

Report message to a moderator

[Message index]

		C1, 4.7uF cap By: colinhester on Sat, 22 January 2005 18:49
		Re: C1, 4.7uF cap By: PakProtector on Sat, 22 January 2005 19:46
		Re: C1, 4.7uF cap By: Manualblock on Sat, 22 January 2005 19:58
		C1, 7.5 uF/440VAC By: PakProtector on Sat, 22 January 2005 20:21
		Re: C1, 7.5 uF/440VAC By: Manualblock on Sun, 23 January 2005 06:59
		How's this cap? By: colinhester on Mon, 24 January 2005 14:24
		That is a FINE cap... By: PakProtector on Mon, 24 January 2005 15:29

Previous Topic:	T, confirm correct transformer spec from Heyboer
Next Topic:	trade DN2340 For tube sockets?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 04 17:20:57 CST 2024